1、Ping是Windows附带的可执行命令。使用它可以检查网络是否可以连接,用好它可以帮助我们分析判断网络故障。申请格式:Ping IP地址。该命令也可以与许多参数一起使用。
2、具体来说,键入Ping并按enter查看详细说明。
3、下面,本文将教你用ping命令简单测试网速。
(资料图片)
4、命令格式:
5、Ping ip地址-l字节
6、注意:在上面的命令中,L是字母L,而不是数字1。
7、网速等于(发送字节数/返回时间[ms ])K字节。
8、上面计算的结果是字节,而不是我们通常所说的比特(bps)。
9、比如:
10、C:\Documents and Settings\Administratorping 202.101.224.68 -l 1000
11、Pinging 202.101.224.68 with 1000 bytes of data:
12、Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
13、Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
14、Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
15、Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
16、Ping statistics for 202.101.224.68:
17、Packets: Sent=4, Received=4, Lost=0 (0% loss),
18、Approximate round trip times in milli-seconds:
19、Minimum=38ms, Maximum=38ms, Average=38ms
20、根据上面发送和返回的信息,可以简单的得出,到202.101.224.68的网速是b3hN_M[9I|!s
21、网速等于(发送字节数/返回时间[ms ])K字节。
22、1000/38K字节
23、26.32千字节
24、附件:ping命令帮助描述
25、C:\Documents and Settings\Administratorping /?
26、Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS]
27、[-r count] [-s count] [[-j host-list] | [-k host-list]]
28、[-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name
29、Options:
30、-t Ping the specified host until stopped.
31、To see statistics and continue - type Control-Break;
32、To stop - type Control-C.
33、-a Resolve addresses to hostnames.
34、-n count Number of echo requests to send.
35、-l size Send buffer size.
36、-f Set Don""""t Fragment flag in packet (IPv4-only).
37、-i TTL Time To Live.
38、-v TOS Type Of Service (IPv4-only).
39、-r count Record route for count hops (IPv4-only).
40、-s count Timestamp for count hops (IPv4-only).
41、-j host-list Loose source route along host-list (IPv4-only).
42、-k host-list Strict source route along host-list (IPv4-only).
43、-w timeout Timeout in milliseconds to wait for each reply.
44、-R Trace round-trip path (IPv6-only).
45、-S srcaddr Source address to use (IPv6-only).
46、-4 Force using IPv4.
47、-6 Force using IPv6.
48、C:\Documents and Settings\Administrator
本文到此结束,希望对大家有所帮助。
标签: